GE FOCAS ETHERNET DRIVER

Also I chose the driver under my brand. PC2 Series or any Computer Link compatible device. Only the Fast Ethernet function is effective. Since the versioning of the FWLIB files has been an issue for users in the past, verify you have these two files:. We will want to discuss further options for analyzing the socket connection, with tools like Telnet and Wireshark.

Uploader: Daisida
Date Added: 28 March 2014
File Size: 64.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 84716
Price: Free* [*Free Regsitration Required]

Or, refer to the Open protocol section of that same manual if this is the Device Model etherner you end up going with. All forum topics Previous Topic Next Topic.

Ethrnet are the files you will need: Thank you for explaining your setup and gr followed. Also I chose the driver under my brand. There are a few additional steps to follow in this setup. So, the functions which cannot be used for the CNC which is owned by the customer for the purpose of the application development may exist. If you’re searching for a specific funktion and you know the area it’s in first click on the section e.

What am I doing wrong? For more information on this, see either of the following: What else do I need to do? Since the versioning of the FWLIB files has been an issue for users in the past, verify you have these two files:. PC2 Series or any Computer Link compatible device. Therefore, please confirm the availability of the function at the target control software of the CNC, then go ahead the development of the application.

Read Also:  LENOVO T43 WIRELESS DRIVERS

Consult your hardware programming manual. Let me know how this goes. Function Reference related to library handle, node I do suspect there is a problem with the versions of the files you are using. I will be happy with any help. Do you see Values updating, with a “Good” Quality, for these Tags? And is ve connection error now only in the problem with the installation of libraries?

This driver can import tags defined in a Wonderware InTouch project. Do I still have to do something extra all these steps? Devices are dependent on the Wonderware InTouch application. Contact us Contact us Get in touch with our specialists, please fill in the form below, and we will get back to you as soon as we can.

Kepware – KEPServerEx

Everything is still in KepserverEx. However, there according to the manual for the installation, all libraries were placed in the installation folder of this program, but they were also stored in SysWOW As for your previous message. So, is there something wrong with the dll file?

Read Also:  IEEE 1284.4 DEVICES DRIVER FOR WINDOWS 7

After following the steps above and adding your tags, launch the OPC Quick Client to test the connection.

Ethernet Driver to Connect to GE Fanuc Focas 2 CNCs-Software Toolbox

We will want to discuss further options for analyzing the socket connection, with tools like Telnet and Wireshark. Any device that supports or R protocol and uses the RK computer link program. Thank you for giving me so much time.

Sorry for the inconvenience, but I really do not understand what focqs problem is. After acquiring and installing the libraries, please let us know how it goes, and the status of this connection.